Clean and Strip

Category:

Product Description

Mild cleaning agent for cleaning and stripping newly installed or heavily soiled vinyl, linoleum, rubber and resin floors. Removes the remains of old care products, stubborn stains and adhesive residue.

Unit Size:

750ml bottle
5 litre canister
10 litre canister

Application Areas

Vinyl, linoleum and rubber flooring. Gentle with low PH value, therefore particularly suitable for linoleum and rubber flooring.

Application

Cleaning after installation:

Remove coarse dirt with a sweeping brush or vacuum cleaner. Dilute Clean and Strip/Schutz Stripper with water in a ratio of between 1:5 and 1:10. In case of particularly stubborn residues (e.g., in the commercial sector) use undiluted if required. For low levels of dirt adjust the strength of the solution as appropriate. Apply the cleaning solution to the floor area, distribute and allow to stand for approx. 10 minutes. Clean the floor surface using a scrubber, Padmaster System or Monodisc SRP (+ suitable pad or scrubbing brush). Take up the loosened dirt with a Spray Extractor with hard floor adapter or rubber blade and an absorbent wide-headed mop. Mop the floor with clear water until completely clean.
Consumption: 1 l = 10 – 30 m²

Stripping:

Remove coarse dirt with a sweeping brush or vacuum cleaner. For domestic use, dilute Clean and Strip/Schutz Stripper in a ratio of 1:5 with water. In the commercial sector, use in concentrated form or diluted in a ratio of up to 1:3 (depending on the resistance of the protective film), spraying the floor with clear water before use if necessary. The method of procedure corresponds with that described in the previous paragraph for cleaning after installation, although it may be necessary to allow a standing time of 15-20 minutes.

Product Information & Consumption

Attention:

Do not allow Clean and Strip/Schutz Stripper to dry on the floor. For this reason, work in sections. Before stripping test sensitive floor coverings (e.g., rubber flooring,) check for colour and material fastness at an inconspicuous spot. If necessary, dilute Clean and Strip/Schutz Stripper even more and apply several times using a short standing time.
Wear rubber gloves during use and ensure that the rooms to be treated are well ventilated. Do not spray sensitive surfaces (e.g., wood, metal, varnished surfaces) with the cleaning solution.

Consumption:

1 l = 30-50 m² (domestic use) and / or
1 l = 6- 10 m² (commercial use, undiluted

Technical Data

pH-level: approx. 10.0 (concentrate)
Product code for cleaning and care products (Giscode): GG 20

Data on ingredients (EC recommendation): Less than 5% anionic surfactants, less than 5% non-ionic surfactants, less than 5% NTA, less than 5% phosphates. Other ingredients: Solvents, process materials and aromas. UBA 0210 0194

Clean and Strip/Schutz Stripper should be stored in a cool, dry place in its closed original container. Keep locked up and out of the reach of children.

Reviews

There are no reviews yet.

Be the first to review “Clean and Strip”