Turbo Strip


Product Description

Express stripper to remove care films from hard sealers quickly, powerfully and thoroughly, also from older or multilayer product residues as well as releasing agents from rubber floors. Short standing time, odourless formula. For the application on vinyl, linoleum and rubber floors. For the professional application in the commercial sector. Irritant.

Unit Size

10 litre canister

Application Area

Floor coverings made of synthetic materials (PVC, CV, polyolefin), linoleum and rubber coverings (*). Not suitable for floors sensitive to solvents (e.g. asphalt-tiles), nor for floors which have been coated with professional sealants (e.g. PU Sealer). Please observe the care instructions relating to specific floor coverings.
(*) Always check first, make sure that the colour and material are resistant, by trying out an unobtrusive area !


Coarse dirt should first be swept or vacuumed away. Dilute Turbo Strip with water in a ratio of between 1:1 and 1:5 (depending on resistance of the care-film). Spread the diluted cleaner over the floor covering and let it soak in for about 5-15 minutes. Then work away at the covering surface with a scrubbing brush, or with Padmaster, or Monodisc machine SRP (using the appropriate pad, or scrubbing-brush attachment). Remove the soiled liquid with wet-suction (e.g. spray suction with hard floor adapter, Premium F1/F2), or rubber squeegee and absorbent wide-mop, and carefully wash the floor with clear water until the surface has been completely neutralised.

Product Information & Consumption

Please note:

Do not let Turbo Strip dry out on the floor, therefore work in sections at a time. Before stripping, check the covering for colour and material consistency at a place that will not be noticed. Do not moisten sensitive surfaces (e.g. wood, metal, furnishings, lacquered and sealed surfaces) with the cleaning mixture.


2-6 litres per 100 sq.m (dilution of 1:1 up to 1:5)

Technical Data


approx. 10.0 (concentrate)
Substances contained: less than 5% non-ionic tenside. Contains fragrances, LIMO-NENE, amine, solvents.

Turbo Strip is subject to regulations concerning hazardous substances and displays the hazard symbol “Xi” and includes hazard information “Causes irritation to the eyes.” Avoid any skin or eye contact with the stripper. Only use in well-ventilated areas.

Store Turbo Strip in closed original containers, in a cool and dry place. Keep tightly closed and out of the reach of children.


There are no reviews yet.

Be the first to review “Turbo Strip”